18CFM Electric Piston Compressor 125PSI, 100L
|
Electric Motor: |
Single Phase 240Volt, 3HP |
|
IP Rating: |
IP44 |
|
Electric Motor Rpm: |
2600 RPM |
|
Rotation direction : |
Clockwise, (View from flywheel) |
|
Australian Approved Plug: |
Single Phase 3 pin Aust.15AMP |
|
Compressor: |
Three Cylinder, Cast Iron Construction, 125PSI |
|
Compressor Drive: |
Twin V-Belt |
|
Compressor RPM: |
900RPM |
|
Tank Capacity: |
100 Litres |
|
Compressor CFM / Lt per min: |
18 CFM /525lt/min (FAD 13CFM) |
|
Pressure Gauge : |
Pressure gauge MPA |
|
Outlets: |
2 × 1/4" Ball Valves |
|
Total Weight: |
134KG |
|
Dimensions: |
121 (L) x 43 (W) x 85 (H) CM |
Our air compressors are built tough to last. The 18 CFM electric piston compressor units are built with tough cast iron instead of aluminium and a low RPM pump, consequently, the engine runs cooler and lasts longer.
All our compressors use copper connecting pipes and stainless-steel reed valves for durability and longevity. They are designed with raised heads and multiple cooling fins which also allow better heat dissipation.
Our pressure vessels are designed and built to Australian Standard AS1210 with a design life of 20 years.
Additionally, all our compressors can be 100% rebuilt – they are not cheap throwaways!
The warranty is for 12 months.
We warrant our products for faulty parts and defective workmanship. This warranty does not cover misuse, incorrect or irregular maintenance and accidents during use. If a product or part is faulty, we require it to be sent back to us including a copy of the Tax Invoice.
Once the item or part is tested and is faulty, it will be repaired or replaced under warranty. The purchaser is responsible for all postage costs of returning any faulty item back to us and is also responsible for the postage costs incurred when we send the replacement part back to the purchaser.