30kVA 415V Kruger Diesel Generator
|
Prime Power : |
24kW / 30kVA 415Volts 42Amps |
|
Standby Power : |
26kW / 33kVA |
|
Power Factor : |
0.8 |
|
Phase Voltage : |
Three Phase 415 Volt |
|
Frequency : |
50 Hertz |
|
Engine : |
OEM 4 Cylinder Diesel Turbo |
|
RPM : |
1500/min |
|
Cooling Method : |
Water Cooled - Rated For Australia's North |
|
Alternator : |
Three Phase 4 Pole Brushless Synchronous -/c AVR |
|
Starter System : |
12 volt Electric - Battery Included |
|
Controller : |
Comap MRS11 Controller (European Made) |
|
|
2 Wire / Remote Start Capable |
|
|
Over Temperature Protection |
|
|
Over Current Protection |
|
|
Low Oil Protection |
|
Safety Systems : |
Battery Isolator |
|
|
Emergency Stop |
|
|
Failsafe Shutdown Fuel Solenoid |
|
Noise Level : |
63 dBA at 7 metres |
|
Fuel Tank Capacity : |
165 Litres (-/c Fuel Gauge) |
|
Running Time : |
25 Hours Continuous (prime load) |
|
Fuel Consumption : |
6.5 litres/hour (prime load) |
|
Chassis Enclosure : |
Lockable |
|
|
Sound Deadening Throughout |
|
|
Weather Resistant Powder Coating |
|
|
Stainless Steel Fittings |
|
|
External Use |
|
Mine Site Ready Bunding : |
Yes |
|
ATS (Mains Failure) : |
Easy Connect Plug (ATS Box Optional) |
|
Single Phase Outlets : |
2 x 15 Amp IP66 |
|
Three Phase Outlets : |
1 x 20 Amp IP66 |
|
|
1 x 32 Amp IP66 |
|
Hardwire Terminals : |
Yes |
|
RCD / RCBO : |
Australian Standard (IP67 Enclosed) |
|
Options : |
Automatic Start Systems |
|
|
GSM |
|
|
Timer |
|
|
Synchronisation |
|
|
Wireless Remote |
|
|
Solar System Compatible (Majority) |
|
|
ATS (Mains Failure Detection / Auto Transfer Switch) |
|
|
Minespec Padlockable Battery Isolator |
|
Weight : |
880 kg |
|
Dimensions : |
187 L x 81 W x 122 H cm |
The warranty is for 12 months or 1000 hours.
Batteries are not included in our warranty.
We warrant our products for faulty parts and defective workmanship.
This warranty does not cover misuse, incorrect or irregular maintenance and accidents during use.
If a product or part is faulty, we require it to be sent back to us including a copy of the Tax Invoice.
Once the item or part is tested and is faulty, it will be repaired or replaced under warranty.
The purchaser is responsible for all postage costs of returning any faulty item back to us and is also responsible for the postage costs incurred when we send the replacement part back to the purchaser.