Phone: 1300 676 820

Track Your Order

Toggle Nav

ATS / AMF - Mains Failure Automatic Transfer Switch Three Phase 1000 AMP

In stock

If you are a residential house or dwelling but you want to pick it up from the shipping depot yourself please choose industrial / commercial premises.


Design :

Modular Steel (Not Waterproof)

Controller :

Smartgen ATS Controller

Starting Method :

2 Wire Trigger / Auto / Manual

Switching Method :

Automatic (Mains Sensing) / Manual

Connection :

ATS to Generator - ATS Lead Supplied

Switching Delay :

0-60 Seconds (Mains Loss)

Generator Start Delay :

0-90 Seconds (Generator Start/Stop)

Security :

Key Lockable Cabinet

Safety :

Padlock Isolation

Phase Voltage :

Single, Two & Three Phase Available

Options :

125 Amp 1 Phase Up To 25kVA 12 Volt   $1500


125 Amp 2 Phase Up To 25kVA 12 Volt   $1500


125 Amp 3 Phase Up To 80kVA 12 Volt   $1500


125 Amp 3 Phase Up To 80kVA 24 Volt   $1500


250 Amp 3 Phase Up To 160kVA 24 Volt $1800

Weight :

 65 kg

Dimensions :

 60 x 34 x 92 cm


A transfer switch allows safe switching between your mains supply (primary source) and your standby Generator supply (secondary source) whilst ensuring both sources cannot be connected simultaneously.

It does so by continually monitoring the incoming mains supply. If the voltage of the mains supply fails or is significantly reduced to create a brownout condition, it will immediately disconnect the mains supply and command the Generator to start.

Once the generator is producing a stable supply it will transfer the load to the Generator. When a stable mains supply is restored it will carry out the reverse process, transferring the load back to the mains and shutting down the generator.

The ATS controller can accurately detect 2 ways-3 phase, 2 ways-1 phase or even 2ways-2phase voltage. It can also make an accurate judgment to conditions of abnormal power characteristics (loss of electricity, over or under voltage etc.), control the ATS to transfer after your predefined delay.

Modular configuration design, sturdy steel shell, compact structure with easy mounting and maintenance.


The warranty is for 12 months. Batteries are not included in our warranty.

We warrant our products for faulty parts and defective workmanship. This warranty does not cover misuse, incorrect or irregular maintenance and accidents during use.

If a product or part is faulty, we require it to be sent back to us including a copy of the Tax Invoice.

Once the item or part is tested and is faulty, it will be repaired or replaced under warranty.

The purchaser is responsible for all postage costs of returning any faulty item back to us and is also responsible for the postage costs incurred when we send the replacement part back to the purchaser.

Write Your Own Review
You're reviewing:ATS / AMF - Mains Failure Automatic Transfer Switch Three Phase 1000 AMP
Your Rating