Synchronized 2200 kVA, 415V Diesel Generators - Cummins Powered Stamford Alternators
Prime Power : |
1,600kW / 2,000kVA 415 Volts 2,800Amps |
Standby Power : |
1,760kW / 2,200kVA |
Power Factor : |
0.8 |
Phase Voltage : |
Three Phase 415 Volt |
Frequency : |
50 Hertz - Electronic Speed Controlled |
Engine : |
CUMMINS Diesel KTA38-G5 + KTA38-G5 |
RPM : |
1500/min |
Cooling Method : |
Water Cooled - Rated For Australia's North |
Alternator : |
STAMFORD Three Phase 4 Pole Brushless HCI634J + HCI634J |
Starter System : |
24 volt Electric - Batteries Included |
Controller : |
Comap IC-MINT Synchronizable |
|
2 Wire / Remote Start Capable |
|
Over Temperature Protection |
|
Over Current Protection |
|
Low Oil Protection |
Safety Systems : |
Battery Isolator |
|
Emergency Stop |
|
Failsafe Shutdown Fuel Solenoid |
Noise Level : |
75 dBA at 7 metres |
Fuel Tank Capacity : |
1000 Litres + 1000 Litres (-/c Fuel Gauge) |
Running Time : |
4.8 Hours + 4.8 Hours Continuous (prime load) without auxiliary fuel tank |
Fuel Consumption : |
418 Litres/Hour (prime load) |
Chassis Enclosure : |
Lockable |
|
Sound Deadening Throughout |
|
Weather-Resistant Powder Coating |
|
Stainless Steel Fittings |
|
External Use |
Mine Site Ready Bunding : |
Yes |
ATS (Mains Failure) : |
Easy Connect Plug (ATS Box Optional) |
Hardwire Terminals : |
Yes |
RCD : |
Australian Standard (IP67 Enclosed) |
Options : |
Automatic Start Systems |
|
GSM |
|
Timer |
|
Synchronization |
|
Wireless Remote |
|
Solar System Compatible (Majority) |
|
ATS (Mains Failure Detection / Auto Transfer Switch) |
|
Minespec Padlockable Battery Isolator |
Weight : |
14,950 kg + 14,950 kg |
Dimensions : |
605 L x 244 W x 290 H cm + 605 L x 244 W x 290 H cm |
Kruger’s 2200kVA Synchronised Cummins powered diesel generator combination will run and keep on running as long as you need it to, wherever you need it to. No conditions are too harsh, and no generators boast this level of safety and reliability at an industry-low cost.
- Low RPM - 1500 RPM, 6 Cylinder Engine: Generators with a low RPM last longer and have a more stable operation.
- Water Cooled: Perfectly suited for use in extreme temperatures.
- Safe, Quick Shutdown: Emergency stop button next to control panel.
- Won't Keep You Up: Very quiet operation thanks to a phenomenal Cummins engine.
- H-Class Insulation: Our Stamford alternators are built with it to run smoothly in high heat.
Why choose Kruger Generators?
All Kruger generators are either selected or specially designed to withstand the harsh Australian environment and usage. They are "made tough to last" for maximum longevity. They are also reliable, fuel-efficient and incredible value for money. It will be hard to find a generator of a better value in Australia.
Made Tough to Last: Kruger generators are either designed by our in-house generator experts or carefully selected from our preferred suppliers based on quality, performance, reliability, longevity and safety. They are built to high-quality standards and then each model is thoroughly tested, to ensure they will perform and withstand Australia's most challenging environments and usage.
Ready to Go: We supply this generator fully prepared and primed with all fluids, ready for use upon receipt. Our in-house team thoroughly tests and preps every generator set with all fluids so it's ready for use immediately upon receipt.
Easy-to-Find Consumables: It's such a hassle when consumables and parts you require to maintain your generator are hard to find, months after purchase when your supplier stops stocking for your model. Our generator consumables like filters will be available through us long after the warranty expires, or they are available almost everywhere.
Full Spare Parts Stocked, Long After Warranty Expires: We will continue to stock parts for all our generators long after the warranty expires to keep you up and running.
Cummins 12 months or 1000 hours limited warranty.
Batteries are not included in our warranty. We warrant our products for faulty parts and defective workmanship. This warranty does not cover misuse, incorrect or irregular maintenance and accidents during use.
If a product or part is faulty, we require it to be sent back to us including a copy of the Tax Invoice. Once the item or part is tested and is faulty, it will be repaired or replaced under warranty. The purchaser is responsible for all postage costs of returning any faulty item back to us and is also responsible for the postage costs incurred when we send the replacement part back to the purchaser.